International Harvester / Farmall Cub 154 Lo-Boy Parts

[Categories]   [All Cub 154 Lo-Boy Parts]   [All Farmall Models]  

Clutch Brake Puck - Plastic/Friction Pad. 0.6485 inch diameter body, 0.925 inch total length. Friction material out 0.115 inch from body and 0.500 inch diameter. Sold individually, 2 used per tractor. Replaces: 404642R1. (Item #: 126193, Ref: 404642R1) $16.00
Clutch Drive Shaft - Clutch Drive Shaft. Fits tractor models Cub 154 Lo-Boy without creeper gear, serial number 18709 and up, Cub 185 Lo-Boy all without creeper. Oiled steel 1.060 inch diameter x 29 inches long total. Replaces: 543603R1. (Item #: 178505, Ref: 543603R1) $247.08
Clutch Drive Shaft - This Clutch Drive Shaft is 24-1/2 Long and used on Cub 154 Bo-Boy 154 up to serial number 18708 with creeper drive. Replaces: 530422R2 (Item #: 126130, Ref: 530422R2) $250.72
Clutch Drive Shaft - This Clutch Drive Shaft is 31 inches long. It fits Cub 154 Lo-Boy without creeper drive up to serial number 18708. Replaces: 404670R4. (Item #: 126135, Ref: 404670R4) $315.00
Clutch Drive Shaft - This Clutch Drive Shaft is 22-5/8 inches long. Fits Cub 154 Lo-Boy serial number 18709 and up with creeper drive, and all Cub 185 Lo-Boy with creeper drive. Replaces: 543679R1. (Item #: 126131, Ref: 543679R1) $315.00
Clutch Kit - This single stage clutch kit contains a new pressure plate assembly (404639R94), a new 5 1/2 inch, 10 spline, 15/16 inch hub, woven clutch disc (404640R93), new pilot bushing (251266R1), and alignment tool. Release Bearing NOT included. For tractor models Cub 154 Lo-Boy, 184, 185 Lo-Boy. (Item #: 176735, Ref: 404639KLB) $104.00
Clutch disc - 5 1/2 inch new clutch disc, Spline DIAMETER: 0.9375 inch, spline COUNT : 10. Fits Cub Lo-Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 154346, Ref: 404640R93) $30.00
Pilot Bushing - For Cub. This is a bushing, not a bearing. Please verify before ordering. Measures 0.815 inch outside diameter, 0.625 inch inside diameter and 1.000 inches long. (Item #: 155743, Ref: 251266R1) $5.90
Pilot Bushing - This Pilot Bushing is Bronze and has a 0.875 inch outside diameter, is 0.750 inches long with a 0.625 inch inside diameter. Fits Cub Lo-Boy 154 and Cub Lo-Boy 185. Replaces 404666R1. (Item #: 179346, Ref: 404666R1) $16.10
Pressure Plate - This 7 Inch Pressure Plate is superior to the original as it is made with ductile iron instead of grey iron, increasing the tensile strength by over 100% and more importantly allowing for a significant yield strenth. Cast iron is not flexible and shatters easily, whereas ductile iron is more flexible and elastic. This pressure plate does not include the bushing or the clamping bolt. Does not include 404666R1 Bushing or 531619R1 Bolt. Replaces: 531708R11 (Item #: 178917, Ref: 531708R11) $129.00
Pressure Plate Bolt and Nut - The Pressure Plate Bolt and Nut is used with 531708R11 Pressure Plate. (Item #: 179287, Ref: 531619R1) $13.00
Release Bearing With Release Carrier - Fits 154, 185. This will NOT fit a Cub Lo-Boy 184. Has 10-32 Grease zerk fitting (Item #: 111033, Ref: 404671R1) $83.00
Remanufactured Pressure Plate - Remanufactured Pressure Plate: 5 1/2 inches with 3 springs. Fits Cub Lo-Boy, Cub 154-Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 206062, Ref: 404639-R) $99.01
Universal Parts and Accessories Category: Clutch
Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01
Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1084.94